The Center for Innovation in Teaching & Learning's One Touch Video Recording Studio is a self-serve recording studio for video content creation located in Rm. 120A inside of Building C. This studio is similar to the One Touch Studio located in EWFM Library and allows users to record (and practice) presentations, lessons, interviews, and a host of other types of video content with just the press of a button and without any previous video production experience. As this room is only accessible via card swipe access for pre-approved users, its ideal use is for classes, long term projects, or faculty and students looking to create content on an ongoing basis. For single use or occasional need for one touch video recording, the studio in EWFM is recommended.

If you are an instructor or student who has a need for accessing the Building C video recording studio, please contact your Instructional Technologist or submit an Instructional Technology help request via the form at http://www.lehigh.edu/help.

Instructions for Recording a Video

Insert USB drive
Studio lights, camera, and confidence monitor will power on after a few seconds. Turn
OFF room lights using wall switch by door.
Select camera position.
Use the camera position pre-set buttons to choose the appropriate shot.
Position 1: Standard/medium shot
Position 2: Wide shot (use when utilizing on-screen display)
Position 3: Close-up
Use the confidence monitor to adjust your standing position on the floor.
Optional: Turn on display
Use the Display On/Off buttons to control the on screen display if you will be using it in your recording. Use the HDMI cable to connect your laptop.
Adjust the mounted display so that it fully appears in your shot (display arm is strong, but move gently!)
Press record.
Press the “record” button when you are ready to begin recording. You will have 5 seconds before recording begins. Press “stop” when you are finished. Turn ON room lights using wall switch by door.
Remove USB drive.
When “record” button stops blinking, you may remove the USB drive. Your recording will appear as an MP4 file inside a new folder.

Instructions for Recording a Video

Insert USB drive
Studio lights, camera, and confidence monitor will power on after a few seconds. Turn
OFF room lights using wall switch by door.

Select camera position.
Use the camera position pre-set buttons to choose the appropriate shot.

Position 1: Standard/medium shot
Position 2: Wide shot (use when utilizing on-screen display)
Position 3: Close-up

Use the confidence monitor to adjust your standing position on the floor.

Optional: Turn on display
Use the Display On/Off buttons to control the on screen display if you will be using it in your recording. Use the HDMI cable to connect your laptop.
Adjust the mounted display so that it fully appears in your shot (display arm is strong, but move gently!)

Press record.
Press the “record” button when you are ready to begin recording. You will have 5 seconds before recording begins. Press “stop” when you are finished. Turn ON room lights using wall switch by door.

Remove USB drive.
When “record” button stops blinking, you may remove the USB drive. Your recording will appear as an MP4 file inside a new folder.

BC 120A - One Touch Video Recording Studio

Instructions for Recording a Video

Insert USB driveStudio lights, camera, and confidence monitor will power on after a few seconds. Turn OFF room lights using wall switch by door.

Select camera position.Use the camera position pre-set buttons to choose the appropriate shot.

Position 1: Standard/medium shot Position 2: Wide shot (use when utilizing on-screen display) Position 3: Close-up

Use the confidence monitor to adjust your standing position on the floor.

Optional: Turn on displayUse the Display On/Off buttons to control the on screen display if you will be using it in your recording. Use the HDMI cable to connect your laptop. Adjust the mounted display so that it fully appears in your shot (display arm is strong, but move gently!)

Press record.Press the “record” button when you are ready to begin recording. You will have 5 seconds before recording begins. Press “stop” when you are finished. Turn ON room lights using wall switch by door.

Remove USB drive.When “record” button stops blinking, you may remove the USB drive. Your recording will appear as an MP4 file inside a new folder.

Insert USB drive
Studio lights, camera, and confidence monitor will power on after a few seconds. Turn
OFF room lights using wall switch by door.

Select camera position.
Use the camera position pre-set buttons to choose the appropriate shot.

Position 1: Standard/medium shot
Position 2: Wide shot (use when utilizing on-screen display)
Position 3: Close-up

Optional: Turn on display
Use the Display On/Off buttons to control the on screen display if you will be using it in your recording. Use the HDMI cable to connect your laptop.
Adjust the mounted display so that it fully appears in your shot (display arm is strong, but move gently!)

Press record.
Press the “record” button when you are ready to begin recording. You will have 5 seconds before recording begins. Press “stop” when you are finished. Turn ON room lights using wall switch by door.

Remove USB drive.
When “record” button stops blinking, you may remove the USB drive. Your recording will appear as an MP4 file inside a new folder.