Page Comparison

1.  Click the AirPort WiFi icon on the top menu bar.  You   In the menu that pops down, you should see a checkmark next to lehighblue highlight on the lehigh network listing indicating that you are connected to the Lehigh internal network. 

If you are still unable to view web pages, open the AirPort WiFi menu again and select Open Network Preferences.Image Removed'WiFi Settings.'

2.  Verify two things to confirm if you are successfully connectedOn the Network pane of the System Settings app, Click the 'Details' button:

1. Your IP address should start with 128.180 
2. You should be authenticated via PEAP (MSCHAPv2). 

If either or both of these are not correct, click Advanced to open the advanced AirPort settings window. NOTE: In order to make changes on any of the Network preferencescreens, the yellow padlock in the lower-left corner should appear unlocked. If it is locked, click the lock and enter your Mac user name and Mac password into their respective fields. Your account must have administrator privileges to make these changes.

Image Removed

3.  Click the TCP/IP tab.Image Removed4.  

Make sure that:

• • Configure IPv4 is set to Using DHCP

• • Configure IPv6 is set to

Image Removed

5.  Remove any previous instances of "lehigh" from the list of Preferred Networks by clicking the minus[-] button. Click the plus[+] button to add a wireless network profile.

Image Removed

6.  Type lehigh for Network Name. Select WPA2 Enterprisefrom the Security drop down menu. Enter your Lehigh userID(abc123) and password into their respective fields. Click OK. Click OK.

Image Removed

7.  Click OK to close the advanced AirPort settings window.

Image Removed

8.  Click Apply to apply all the changes,

Then click System Preferences on the menu bar at the top-left of the screen, and select Quit System Preferences from the drop down menu.

Image Removed

• • 'Automatic' or Off.

4.  Click the DNS tab:

Make sure that both 'DNS Servers' have IP addresses starting with '128.180.'

5.  Click the 802.1X tab:

Make sure that you are listed as 'Authenticated via EAP-PEAP (MSCHAPv2)

Image Added

5.  If any of the items noted in steps 2-5 are incorrect, you'll want to delete and re-create the network connection record.

Click on 'Forget This Network'

6.  You should be taken back to the main WiFi Settings pane, where the 'lehigh' network will still appear in the list.

Move your mouse cursor to the 'lehigh' listing, and click Connect.

7.  Enter your Lehigh Username and Password, and click OK.

When the 

8.  When asked to verify the network's certificate, click Continue.