Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

1.  First, if at all possible, plug the laptop into a power source.

We have learned from service personnel that many laptop manufacturers, in order to increase battery life, have reduced power output so severely that when power is drawn by using the hard drive, sync signal strength to external monitor ports (which is critical for connection to the projector) may be lost. Also, plugging into a power source ensures your battery won't quit in the middle of your presentation.Image Removed

Image Added

2.  Find your laptop's video output port, and plug in the available input cable.

There are several kinds, and you may also need an adapter cable to connect your particular laptop to the input cable available in the classroom.video output portsImage Removed

Image Added

3.  Next, use the touch panel or push-button control to set the room's display system to use the 'Laptop' input.

Most classrooms are equipped with some sort of video input switching control near the instructor's station or podium.Image Removed

Image Added

4.  Turn on your laptop's video output port.

Most laptops have keyboard combinations to allow the video output to be toggled between three modes:

  1. Just to the laptop screen,
  2. Just to the output port, or
  3. Both the screen and the port.

We recommend using the 'Both' setting, so that you can have a small screen in front of you showing what's on the big screen behind you.picture of keyboard's display switch keyImage Removed

picture of keyboard's display switch keyImage Added

5.  Adjust your laptop's operating system's display settings so that the same image that's on your laptop's screen is also sent to the output port and the projector (rather than treating it as extra desktop space).

Depending on your operating system and video driver software, you'll have a utility or control panel for specifying how the system handles the projector.  For Windows, go to Start > Control Panel > Display > Change Display Settings.

We recommend choosing to 'Mirror' or 'Duplicate' the displays so that the laptop screen and the projector show the same thing, instead of 'Extending the Desktop' and having to move your presentation window over to the other screen.

Note: Due to the differences between the size and resolution of your laptop screen and that of the projector, the image on your laptop screen will likely change.windows_display_control_panelImage Removed

windows_display_control_panelImage Added