...

If you are an instructor or student who has a need for accessing the Building C video recording studio, please contact your Instructional Technologist or submit an Instructional Technology help request via the form at http://www.lehigh.edu/help.

Instructions for Recording a Video

1. Insert USB drive
   Studio lights, camera, and confidence monitor will power on after a few seconds. Turn 
   OFF room lights using wall switch by door.
   
   

2. Select camera position.
   Use the camera position pre-set buttons to choose the appropriate shot.

          Position 1: Standard/medium shot
          Position 2: Wide shot (use when utilizing on-screen display)
          Position 3: Close-up
   Use the confidence monitor to adjust your standing position on the floor.
   
   

3. Optional: Turn on display
   Use the Display On/Off buttons to control the on screen display if you will be using it in your recording. Use the HDMI cable to connect your laptop.
   Adjust the mounted display so that it fully appears in your shot (display arm is strong, but move gently!)
   
   

4. Press record.
   Press the “record” button when you are ready to begin recording. You will have 5 seconds before recording begins. Press “stop” when you are finished. Turn ON room lights using wall switch by door.
   
   

5. Remove USB drive.
   When “record” button stops blinking, you may remove the USB drive. Your recording will appear as an MP4 file inside a new folder.

Image Modified

Image Removed