Room Description: 18 chairs- long conference table and lounge furniture
...
| Default Configuration | |
| |
| Display Port (DP) | HDMI 2 |
|---|---|
One wall-mounted 86" touch sensitive monitor (left) connected to
| One wall-mounted 86" monitor (right) connected (not touch-enabled) to
|
Alternative Configuration | |
| Display Port (DP) | HDMI 1 |
| One Dell 7050 micro computer, with the public site image | Extended Display of computer image, Make sure computer set to extended displays - and change input to on second display to HDMI 1 |
| Other Room Equipment: | |
| One Crestron Mercury conferencing unit for audio in/out | |
| One PTZ camera below monitors controlled by Mercury unit connected to PC, controlled by remote | |
These displays can be configured to either show the room's computer display with an extended display on second monitor,
or to show the room's computer display on one display and to project a laptop image on the other display.
The inputs are not configured to allow to mirror the mirroring same displays on each screen.
Use:
Wake up the Displays
You can wake up the Dell display by using the proper Dell remote control – You may need to press and hold the power button for at least 6 seconds.
...
| Remote | Point Close to the Sensor | Power On or Change Inputs |
|---|---|---|
|
|
|
Remotes for Display(s)
OR
...