Room Description: 18 chairs- long conference table and lounge furniture
Two Displays | |
Display Port (DP) | HDMI 2 |
---|---|
One wall-mounted 86" touch sensitive monitor ( |
...
left) connected to One Dell 7050 micro computer, with the public site |
...
image |
...
One wall-mounted 86" monitor ( |
...
right) connected (not touch-enabled) to One AirMedia wireless laptop connection | |
Other Equipment: | |
One Crestron Mercury conferencing unit for audio in/out | |
One PTZ camera below monitors controlled by Mercury unit connected to PC, controlled by remote |
Use:
By Default, The monitor on the left hand side will display a computer log in. The monitor on the right displays the crestron wireless home screen.
You can project your display from your personal laptop using either an HDMI or a wireless connection.Please note – These displays can be configured to either show the room's computer display with an extended display on second monitor, or to show the room's computer display on one display and to project a laptop image on the other display. The inputs are not configure to allow to mirror the same displays on each screen.
Use:
Wake up the Displays
You can wake up the Dell display by using the proper Dell remote control – You may need to press and hold the power button for at least 6 seconds.
PLEASE NOTE: You have to be less than one foot from sensor to control the correct monitor but both remotes can control either display.
Remote | Change Inputs |
---|---|
...
Remotes for Display(s) – There are two remotes – one for each display.
OR
You can press the power button on the far right at the bottom of the display. See image.
...
Computer on back of monitor | Keyboard for Dell computer | PTZ camera under monitors for web conferencing |
Connecting a Laptop:
By Default, The monitor on the left hand side will display a computer log in. The monitor on the right displays the crestron wireless home screen.
You can project your display from your personal laptop using either an HDMI or the wireless air media connection.
Using the Crestron Control Panel
...