Configuration and available technology
...
These displays can be configured to either show:
...
- Computer screen on one display and to project and a laptop image on the other display
- Computer screen with an extended display on second display
The inputs are not configured to allow to mirroring same displays on each screen.
...
| Default Configuration | |
| |
| Display Port (DP) | HDMI 2 |
|---|---|
One wall-mounted 86" touch sensitive monitor (shown left) connected to
| One wall-mounted 86" monitor (shown right) connected (not touch-enabled) to
|
Alternative Configuration | |
| |
| Display Port (DP) | HDMI 1 |
| One Dell 7050 micro computer, with the public site image | Extended Display of computer image, Make sure computer set to extended displays - and change input to on second display to HDMI 1 |
| Other Room Equipment: | |
| One Crestron Mercury conferencing unit for audio in/out | |
| One PTZ camera below monitors controlled by Mercury unit connected to PC, controlled by remote | |
Use:
Wake up the Displays
You can wake up the Dell display by using the Dell remote control – You may need to press and hold the power button for at least 6 seconds.
...
| Remote | Point Close to the Sensor | Power On | Change Inputs |
|---|---|---|---|
|
|
|
|
Remotes for Display(s)
OR
...